95050
Request a Quote From This Shop →
Santa Clara CNC machine shop offering 3, 4 and 5-axis milling, CNC turning, surface grinding and EDM from prototypes to production.
Capabilities
- 3-axis, 4-axis and 5-axis CNC milling
- CNC turning
- Surface grinding
- EDM
- Machined heatsinks
- Automated pallet production
Quality & certifications
ISO 9001 certified, ITAR registered (as stated on site).
Request a quote
To request a quote from this shop, use the Request a Quote form. Tell us the part, material, quantity and deadline, and we will pass your request to the shop.
CNC Milling and EDM in Santa Clara at Radian Machining
Radian Machining is a Santa Clara CNC machine shop offering 3, 4 and 5-axis CNC milling, CNC turning, surface grinding and EDM, from prototypes to production. For engineers who need CNC milling and EDM in Santa Clara, Radian combines those processes with a less common specialty: machined heatsinks.
Milling from 3-Axis to 5-Axis
Radian lists 3-axis, 4-axis and 5-axis CNC milling. Each level adds flexibility:
- 3-axis milling handles many flat and prismatic parts efficiently.
- 4-axis milling adds a rotating axis so features around the sides of a part can be cut without reclamping.
- 5-axis milling lets the cutter reach a part from many angles, which helps with complex shapes and angled features.
Having all three means Radian can match the machine to the part instead of forcing every job onto the most complex equipment.
CNC Turning, Surface Grinding and EDM
Beyond milling, Radian Machining offers CNC turning for round parts. It also lists surface grinding and EDM.
Surface grinding uses an abrasive wheel to produce flat surfaces with fine finish and close flatness. It is often used after milling when a part needs a flatter or smoother surface than milling alone can deliver.
EDM, or electrical discharge machining, removes material with electrical sparks rather than a cutting tool. It is commonly chosen for sharp internal corners, narrow slots, intricate shapes and hard materials. Pairing EDM with milling gives Radian a way to make features that a rotating cutter cannot reach.
Machined Heatsinks
Machined heatsinks are the supporting specialty that sets Radian apart. A heatsink pulls heat away from a component and spreads it into the air. Machined heatsinks are cut from solid material, which allows custom fin shapes, mounting features and pockets that fit a specific design. They are often chosen when an off the shelf heatsink does not fit the space or the heat load.
Heatsinks usually have many thin fins close together, which takes careful machining to produce cleanly. A shop that names heatsinks as a service has experience with that kind of geometry.
Automated Pallet Production
Radian lists automated pallet production. In pallet production, parts are loaded onto pallets that the machine can swap automatically. This lets machining continue while the next pallet is being loaded, and it supports efficient production runs. For buyers moving from prototypes into larger quantities, automated pallet production is a sign that the shop is set up to scale.
Certifications and Registration
Radian Machining states that it is ISO 9001 certified and ITAR registered. ISO 9001 is a widely used quality management standard. ITAR registration is a U.S. export control registration. Buyers who need either should confirm current status during quoting.
Prototype to Production at One Shop
Radian handles work from prototypes to production. Keeping both stages at the same Santa Clara shop means fixtures, programs and lessons from early parts carry into production.
What to Include in a Heatsink or EDM Request
For a smooth quote, consider sharing:
- A 3D model and drawing with tolerances
- Material and finish requirements
- Fin thickness and spacing for heatsinks
- Features you expect to need EDM, such as sharp inside corners
- Flatness requirements that may need surface grinding
- Prototype and production quantities
Pointing out thin fins, sharp corners and flatness needs up front helps Radian choose between milling, EDM and grinding for each feature.
A Versatile Santa Clara Option
With multi-axis milling, turning, surface grinding, EDM and machined heatsinks, Radian Machining covers a wide range of parts. For Silicon Valley teams, CNC milling and EDM in Santa Clara at one shop can simplify projects that mix different machining needs.
Have a heatsink, a complex milled part or an EDM feature to make? Send your drawings to Radian Machining through Machining Marketplace with Request a Quote and describe your project.
Is this your shop? Claim or remove this listing.
Sorry, no records were found. Please adjust your search criteria and try again.
Sorry, unable to load the Maps API.