94551
Request a Quote From This Shop →
Livermore quick turn prototype machine shop offering CNC machining, wire EDM, assembly and reverse engineering for consumer electronics, automotive and medical device work.
Capabilities
- Rapid prototype CNC machining
- CNC milling
- CNC turning
- Wire EDM
- Mechanical and electrical wiring assembly
- Reverse engineering
Materials
Metals, Plastics.
Quality & certifications
ISO 9001:2015, ISO 13485:2016, ITAR registered (as stated on site).
Request a quote
To request a quote from this shop, use the Request a Quote form. Tell us the part, material, quantity and deadline, and we will pass your request to the shop.
Rapid Prototype CNC Machining in Livermore with Nexus Automation
When a design needs to become a physical part quickly, rapid prototype CNC machining in Livermore is where Nexus Automation focuses. This quick turn prototype machine shop offers CNC machining, wire EDM, assembly and reverse engineering. It works with consumer electronics, automotive and medical device projects, and it machines both metals and plastics.
Prototype work has different needs than long production runs. Designs change between revisions, quantities are small and engineers often need parts in hand to test fit, function and appearance. Nexus Automation is set up around that kind of work.
CNC milling and CNC turning for prototypes
Nexus Automation offers both CNC milling and CNC turning. Milling covers prismatic parts such as brackets, housings, enclosures and plates. Turning covers round parts such as shafts, pins, bushings and spacers. Having both in one Livermore shop means a prototype assembly with mixed part types does not have to be split across two suppliers.
Because the shop machines metals and plastics, engineers can prototype in the material they plan to use, or test a lower cost plastic version first and move to metal later.
Wire EDM for features milling cannot reach
Wire EDM is the supporting service that sets Nexus apart from a basic prototype shop. Wire EDM uses a thin, electrically charged wire to cut conductive material. It is usually chosen for sharp internal corners, narrow slots, intricate profiles and hard materials, where a rotating cutter would struggle. On prototypes, wire EDM can make features that would otherwise force a design change.
Assembly, including wiring
Nexus Automation also offers mechanical and electrical wiring assembly. For prototype projects, this can be a real time saver. Instead of receiving a box of loose parts and assembling them in house, engineers can receive an assembled unit that is ready for testing. Electrical wiring assembly is a useful addition for consumer electronics and medical device prototypes that combine mechanical parts with wiring.
Reverse engineering existing parts
Reverse engineering is listed as a service too. It helps when a part has no drawing, when an original supplier is gone, or when a legacy component needs to be updated. The shop can work from the physical part toward a design that can be machined again.
Certifications Nexus Automation Lists
Nexus Automation states that it holds ISO 9001:2015 and ISO 13485:2016 certifications and that it is ITAR registered. ISO 9001 covers general quality management. ISO 13485 is a quality standard written for medical devices, which lines up with the shop’s medical device work. ITAR registration is a U.S. export control registration. Buyers should confirm current status for any certification that their project requires.
Who Nexus Automation Works With
The shop names three areas:
- Consumer electronics
- Automotive
- Medical devices
Each of these depends on fast iteration during development. Consumer electronics teams often test several enclosure revisions, automotive teams build test fixtures and brackets, and medical device teams need prototypes made under a documented quality system.
Getting the Most from a Quick Turn Shop
A quick turn prototype shop works best when the request is clear. A few tips help keep rapid prototype CNC machining moving:
- Send a 3D model, plus a drawing for any critical tolerances
- State the material, or ask for a suggestion if it is still open
- Note which features matter for fit and which are cosmetic
- Say whether you need loose parts or an assembled unit
- Mention if a part might need wire EDM features
Clear priorities let the shop focus on what you are testing. For a first prototype, overly tight tolerances on noncritical features can add cost without adding value.
A Livermore Partner for Product Development
Nexus Automation combines rapid prototype CNC machining, wire EDM, assembly and reverse engineering in one Livermore shop. For product teams in the Tri Valley and across the Bay Area, that combination can shorten the path from a model on screen to a working prototype on the bench.
Ready to get your next prototype made? Send your files and requirements to Nexus Automation through Machining Marketplace with Request a Quote and tell the team what you are building.
Is this your shop? Claim or remove this listing.
Sorry, no records were found. Please adjust your search criteria and try again.
Sorry, unable to load the Maps API.