94551
Request a Quote From This Shop →
Livermore shop for precision CNC milling, CNC turning, welding and fabrication, supplying biotech and high purity, semiconductor, aerospace, medical and robotics components.
Capabilities
- CNC milling (64 x 40 x 38 in. envelope)
- 4-axis and 3-D milling
- Hydraulic manifolds
- CNC turning up to 20 in. diameter x 42 in. long
- MIG, TIG and orbital welding
- Structural frame weldments
- High purity tubular fabrication
- Laser marking
- Engineering support and CAD
Request a quote
To request a quote from this shop, use the Request a Quote form. Tell us the part, material, quantity and deadline, and we will pass your request to the shop.
CNC Milling and Fabrication in Livermore at Altamont Manufacturing
For buyers who need CNC milling and fabrication in Livermore from one supplier, Altamont Manufacturing, Inc. brings machining and welding together under one roof. The Livermore shop handles precision CNC milling, CNC turning, welding and fabrication, and it supplies components for biotech and high purity, semiconductor, aerospace, medical and robotics work. That mix means a single part, or a full welded assembly, can move from raw stock to a finished component without changing vendors halfway through.
Many projects stall when machined parts and welded frames come from two different suppliers. Each shop works to its own drawings and schedule, and the buyer becomes the go-between. Altamont Manufacturing offers both sides of the job, which makes it a practical choice for assemblies where machined features and weldments have to fit together cleanly.
Milling Capacity for Larger Parts
Altamont lists a CNC milling envelope of 64 x 40 x 38 inches. That is a useful size for plates, housings and bases that would not fit on a small vertical mill. The shop also offers 4-axis and 3-D milling. A fourth axis lets a part be rotated during the cycle so several faces can be cut in one setup, and 3-D milling is the usual approach for contoured surfaces rather than flat pockets and holes.
Hydraulic manifolds are listed as a specific service. Manifold blocks usually carry many intersecting drilled passages, ports and threads in a compact body, so the work depends on careful planning of drill depths and hole positions. A shop that names manifolds as a service is a sensible place to start when a design includes one.
CNC Turning up to 20 Inches in Diameter
On the turning side, Altamont Manufacturing handles CNC turning up to 20 inches in diameter by 42 inches long. That range covers shafts, rings, flanges, rollers and round housings that are too big for many bar fed lathes. Combining large turning with large milling in the same Livermore shop is helpful for parts that need both, such as a turned body that later gets milled flats, bolt patterns or ports.
Welding for High Purity and Structural Work
Welding is a core part of what Altamont offers, not an add on. The shop lists:
- MIG welding
- TIG welding
- Orbital welding
- Structural frame weldments
- High purity tubular fabrication
Orbital welding is a supporting service worth a closer look. In orbital welding, the torch travels around a tube automatically, which helps produce consistent welds on tubing. It is commonly chosen for high purity tubular systems, where weld quality inside the tube matters as much as the outside. Altamont pairs orbital welding with high purity tubular fabrication, which fits its stated work in biotech and high purity and semiconductor applications.
Structural frame weldments sit at the other end of the scale. Frames, stands and machine bases are often welded first and then machined so mounting surfaces end up flat and in position. A shop with both a large milling envelope and frame welding in house can keep that whole sequence in one place.
Laser Marking, Engineering Support and CAD
Altamont Manufacturing also offers laser marking for part numbers, serial numbers and identification. It provides engineering support and CAD as well. Buyers bringing a concept, a rough sketch or a design that needs adjustment for manufacturing can start the conversation with engineering rather than with a finished drawing package.
When Altamont Manufacturing Is a Good Fit
This Livermore shop is worth considering when a project includes some combination of the following:
- Large milled parts that need a 64 x 40 x 38 inch envelope
- Turned parts up to 20 inches in diameter and 42 inches long
- Hydraulic manifolds
- Welded frames, weldments or high purity tubing
- Laser marking for traceability
- Engineering and CAD help before machining starts
Projects in biotech and high purity, semiconductor, aerospace, medical and robotics work are the areas Altamont names. For buyers in the Tri Valley and across the East Bay, having CNC milling and fabrication in Livermore at one supplier can simplify both scheduling and communication on mixed machining and welding jobs.
If your next project needs machined components, welded assemblies or both, send the details to Altamont Manufacturing through Machining Marketplace. Share your drawings, quantities and material, and use Request a Quote to get the conversation started.
Is this your shop? Claim or remove this listing.
Sorry, no records were found. Please adjust your search criteria and try again.
Sorry, unable to load the Maps API.