95008
Request a Quote From This Shop →
Campbell precision machine shop since 1975 with vertical, horizontal and 5-axis milling, production CNC turning and a prototype department.
Capabilities
- Vertical CNC milling with 3rd and 4th axis
- 5-axis milling
- Horizontal pallet milling
- CNC lathes up to 18 in. diameter
- Bar fed production turning
- Engineering prototype department
- Surface grinding
Quality & certifications
AS9100D, ISO 9001:2015 certified, ISO 13485:2016 compliant (as stated on site).
Request a quote
To request a quote from this shop, use the Request a Quote form. Tell us the part, material, quantity and deadline, and we will pass your request to the shop.
Production CNC Turning and Milling in Campbell Since 1975
JB Precision, also known as Jessee Brothers Machine Shop, has run a precision machine shop in Campbell since 1975. The shop offers vertical, horizontal and 5-axis milling, production CNC turning and an engineering prototype department. For buyers looking for production CNC turning in Campbell, JB Precision pairs bar fed turning capacity with a dedicated prototype team, so parts can be developed and produced in the same place.
Turning Capacity
On the turning side, JB Precision lists:
- CNC lathes up to 18 inches in diameter
- Bar fed production turning
Bar fed turning is a common method for producing turned parts efficiently. A bar feeder pushes long bar stock into the lathe automatically, so the machine can make part after part without stopping for each new blank. It suits repeat production of shafts, pins, bushings, fittings and similar round parts.
Lathes up to 18 inches in diameter extend the range to larger round parts such as flanges, rings and housings that are too big for bar work.
Milling Capacity
JB Precision also offers a wide range of milling:
- Vertical CNC milling with 3rd and 4th axis
- 5-axis milling
- Horizontal pallet milling
- Surface grinding
A 4th axis on a vertical mill lets a part rotate so several sides can be machined in one setup. 5-axis milling reaches angled features and complex shapes. Horizontal pallet milling is well suited to production, since parts can be loaded on one pallet while another is being machined. Surface grinding produces flat, fine finished surfaces when milling alone is not enough.
An Engineering Prototype Department
The engineering prototype department is the supporting service that sets JB Precision apart from a pure production shop. Prototypes and production runs have different rhythms. Prototypes need flexibility and quick answers, while production needs repeatable, efficient processes. A dedicated prototype department lets the shop give development work its own attention without interrupting production.
The benefit for customers is continuity. A part developed in the prototype department can move into production in the same Campbell shop, with knowledge about the part carried forward rather than handed to a new supplier.
Quality Credentials
JB Precision states that it is AS9100D and ISO 9001:2015 certified, and that its quality system is ISO 13485:2016 compliant. Note the difference: the shop lists AS9100D and ISO 9001:2015 as certifications, while ISO 13485:2016 is listed as compliant, meaning the shop says it follows that medical device quality framework. Buyers who require a specific certification should confirm status during quoting.
Five Decades in Campbell
Being in business since 1975 makes JB Precision one of the longer running machine shops in Campbell. Long running shops tend to build steady processes and experienced teams. For customers with long term production needs, that stability is often as important as any single machine.
A Good Fit For
- Repeat turned parts that suit bar fed production
- Larger turned parts up to 18 inches in diameter
- Milled parts that benefit from 4th axis, 5-axis or horizontal pallet work
- Projects that start as prototypes and grow into production
- Parts that need surface grinding
Preparing Your Request
When asking for a quote, consider including:
- A drawing and 3D model with tolerances
- Material
- Prototype quantity and expected production volume
- Required certifications
- Any grinding or flatness requirements
Sharing expected annual volume helps the shop decide whether a turned part is best run on bar fed equipment and how a milled part should be fixtured for production.
A Campbell Shop for the Long Run
Campbell sits on the west side of the South Bay, close to San Jose and the rest of Silicon Valley. For buyers who want production CNC turning in Campbell from a shop that can also mill complex parts and develop prototypes, JB Precision offers a balanced combination built over decades.
Ready to discuss prototypes or production parts? Send your drawings to JB Precision through Machining Marketplace with Request a Quote and share your volumes.
Is this your shop? Claim or remove this listing.
Sorry, no records were found. Please adjust your search criteria and try again.
Sorry, unable to load the Maps API.