Superior Precision Machining, LLC

Fremont CNC machine shop making complex prototypes and production parts on 3, 4 and 5-axis machines, with CMM inspection.

Capabilities

• 5-axis CNC machining
• 3- and 4-axis CNC milling
• Prototypes
• Production runs
• CMM inspection
• Engineering feedback

Quality & certifications

ISO 9001:2015, ISO 13485:2016, ITAR registered (as stated on site).

Request a quote

To request a quote from this shop, use the Request a Quote form. Tell us the part, material, quantity and deadline, and we will pass your request to the shop.

3, 4 and 5-Axis CNC Machining in Fremont from Superior Precision Machining

Fremont buyers often start with a prototype that has to work before anyone will fund production. That is where a shop that offers engineering feedback matters as much as machine capacity. Superior Precision Machining, LLC is a Fremont CNC machine shop listed here for complex prototypes and production parts on 3, 4 and 5-axis machines, with CMM inspection and engineering feedback. This page covers how axes affect a job and what to send with a request.

What the axis count changes

A 3-axis mill moves the cutter left and right, forward and back, and up and down. A 4-axis mill adds a rotating table, which lets the machine reach around the sides of a part. A 5-axis mill adds a second rotation, so the cutter can approach from many angles. More axes usually mean fewer times you have to unclamp and reposition the part, which helps hold features in relation to each other.

Matching the machine to the part

• 3-axis: plates, covers, simple housings with features on one or two faces
• 4-axis: parts with holes or features around a cylinder or on several sides
• 5-axis: complex shapes, angled features, curved surfaces

The listing includes all three, so a shop can pick the lowest-cost route that still meets the drawing.

Why engineering feedback is useful

A drawing can look fine on a screen and still cost more than it needs to. A feature may need a special tool, a wall may be too thin to hold during cutting, or a tolerance may be tighter than function requires. Feedback before cutting can lower cost and avoid a failed run. When you request a quote, ask for comments on anything that looks expensive.

CMM inspection

A coordinate measuring machine touches a part at chosen points and reports where they are in space. It is a common way to check hole positions, flatness and other features that are hard to measure by hand. If you need an inspection report, say which dimensions matter and how many parts should be measured.

Quality and registration details

The listing shows ISO 9001:2015, ISO 13485:2016 and ITAR registration, as stated on the shop’s site. ITAR is a U.S. regulation covering certain defense-related items and data. If your project falls under it, tell the shop early so drawings are handled correctly. Whether your own project qualifies is a question for your compliance team.

Prototype versus production

A prototype run is meant to answer design questions, so it is smaller and more flexible. A production run is meant to repeat the same part at a steady cost. The listing covers both, which helps when a program grows. State your expected yearly volume so the quote reflects the long-term plan.

Send a complete request

• Drawing or model with revision
• Material
• Quantity now and later
• Critical tolerances
• Finish
• Delivery date
• Any inspection or documentation requirements

A nearby Fremont shop can make it easier to review a first article together, and you can fix problems before a bigger order.

Questions worth asking about a first order

For a first order, ask how many parts the shop suggests making, since one extra piece is cheap insurance against a scrapped part. Ask what lead time to expect, and whether a first part can be inspected before the rest of the lot is finished. Also ask what could make the job cost more, such as thin walls, deep pockets or small inside corners. Clear answers early help you avoid change orders later.

Documents for regulated work

If your parts go into a medical or defense product, list any paperwork needs in the request, such as inspection reports or material certificates.

To start, Request a Quote through Machining Marketplace. We will pass your details to Superior Precision Machining.

Is this your shop? Claim or remove this listing.